Görbach Regendusche Duschset für Wohnraum und Badezimmer mit Edelstahlstange und Kopfbrause

Please note: the shower system is supplied without fitting/thermostatic tap/shower tap. Water pressure: for our shower system, the water pressure must be at least 3 to 4 bar. Our shower system is suitable for instantaneous water heaters and low pressure boilers. Assembly is simple, also easy for amateurs.

XXL rain shower head: mirror effects shower head 30 x 30 cm made of stainless steel with easy-care anti-limescale nozzles. Hand shower made of plastic, single function, easy to use. XXL shower shelf: no tools required and no hole on the wall.

Stainless steel shower rail: stainless steel shower column with fixed length 92 cm, simple but classic design, the diameter of the shower rail is 22 mm. Chrome-plated surface for scratch resistance and easy cleaning, the shower rail can be rotated 360°, universal use for small space/space and for corner mounting.

Wall mount: both wall brackets are movable and universally applicable for existing holes, each wall mount can be attached to the wall with 2 screws. The drill holes of the wall mount are horizontal. Assembly is simple, also easy for amateurs. The distance of the two wall brackets can be adjusted between 10-82.5 cm, distance between the two screws is 20-25 mm, please measure in advance to confirm whether it can fit.

Brass diverter – 3-way switching valve made of solid brass with lever for switching between shower head and hand shower. Flow rate: for a water pressure of at least 3 bar comes approx. 8 l/min. with the shower head and approx. 16 l/min with the rain shower head.

Shower hose and shower hose: the hoses are made of stainless steel and fit any G1/2 inch connection without adapter. Due to twist-free design, no matter how you turn, the hoses do not kink. Shower hose: 150 cm, hose for shower fitting: 80 cm.

The warranty does not refer to the wear/damage of the products due to use. 24/7 customer service 24/7. Attention: switch the lever of the diverter down, water runs out of the hand shower. Switch lever upwards, the water from the shower head does not run: the hose has been installed on the wrong connection of the diverter so please rebuild correctly.