Görbach Regendusche Duschsystem ohne Armatur, Edelstahl Duschset Schwarz

Please note: the shower system is supplied without fitting/thermostatic tap/shower tap. Water pressure: for our shower system, the water pressure must be at least 3 to 4 bar. Our shower system is suitable for instantaneous water heaters and low pressure boilers.

XXL rain shower head: black shower head 35 x 25 cm made of stainless steel with easy-care anti-limescale nozzles, ultra-thin 2 mm figure. Hand shower made of plastic, single function, easy to use. A larger shower head provides complete and even coverage of your body and the Air-in technology mixes water with air to create lighter and softer water droplets that pamper your skin.

Brass diverter – 3-way switching valve made of solid brass with lever for switching between shower head and shower head. Flow rate: for a water pressure of at least 3 bar comes approx. 8L/M. with the shower head and 16 L/M in the rain shower. Shower hose: the hoses made of PVC fit any G1/2 inch connection without adapter. Shower hose with length 150 cm, hose for shower tap with length 80 cm.

Robust shower rail: stainless steel shower column with fixed length 92 cm, the diameter is 22 mm, thicker pipe diameter, higher quality and trustworthiness. Black coated surface for corrosion resistant and easy cleaning, the shower rod is 360° rotatable, universal use for small space/space and corner mounting. Distance between the wall and the centre of the shower head: 39 to 40 cm.

Adjustable wall bracket: both wall brackets are movable, the distance of the two wall brackets can be adjusted between 30-80 cm and universal use for existing holes. Each wall mount requires only 1 screw to attach to the wall. The height of the shower rod can be adjusted by lifting or pushing down after loosening the screws on the two wall brackets.

【Support】24/7 service 24/7. Replacement delivery takes approx. 4 working days within the EU. The warranty does not cover the wear/damage of the products due to use. Attention: switch the lever of the diverter down, water runs out of the hand shower. Switch lever upwards, the water from the shower head does not run: the hose has been installed on the wrong connection of the diverter so please rebuild correctly.